Picture Name

A new type of halogen-free flame retardant continuous long glass fiber reinforced PP-plastic TMPPTV01(980)

Key Features:

Hard to burn

Low smoke, halogen-free

High strength (continuous long fiber reinforced)

Glow wire ignition temperature greater than 980°C (close to the melting point of gold)

 

Glow-wire ignition temperature (GWIT):

It means that the material has a high light-off temperature, and the metal insert is embedded in the plastic shell, which will cause the metal insert to burn red under short circuit, overload and other conditions, which will cause the danger of the plastic shell to light off. The higher the glow wire light-off temperature, the smaller the possibility of light-off, and the safer the electricity environment;

 

Low smoke:

The harm of smoke is mainly manifested in two aspects: first, smoke often contains high carbon content. After the insulating plastic shell is blackened by smoke, carbon is conductive, which destroys the insulation of electrical appliances, causing short circuit, electric shock and even fire. The second hazard of smoke is that after most substances catch fire, smoke is emitted first. The rapid spread of smoke will cause poisoning, hypoxia and even death of the victims. The lower the amount of smoke, the more conducive to the safety of the living environment and personal health and safety. The smoke density of halogen-free flame retardants is much lower than that of halogen-containing flame retardants.

 

Halogen free:

Halogen-containing flame retardants in the polymer at the same time, the release of toxic smoke, gas, harm to the environment and human health, the future direction of development is bound to low halogen, halogen-free direction.

 

Use:

Wall switch concealed installation box base (instead of flame retardant PC, flame retardant PA)

 

2. Parts in contact with metal inserts inside the socket (instead of flame retardant PC, flame retardant PA)

 

3. Wall switch concealed installation box (instead of flame retardant PC, flame retardant PVC alloy)

 

4. Yuba shell (replace non-reinforced flame retardant PP, improve strength and heat resistance)

Pre: Material Selection-New Selection of Socket Shell Material PC/PBT

Next: Application of Engineering Plastics in Low Voltage Apparatus